10-06-2024, 08:18 AM
It usually takes a while to massage a pan lip to be flat. I have had a lot of experience with a 2x 2 and a 2x4 making the dimples from the screws flat.
I set the pan on the 2x4 and use the 2x 2 to flatten the metal with a hammer. Find a drain plug with a magnet built in to catch any shavings.
The key is to not over tighten
I set the pan on the 2x4 and use the 2x 2 to flatten the metal with a hammer. Find a drain plug with a magnet built in to catch any shavings.
The key is to not over tighten
Compared to parenting, Cat herding is less complicated
![[-]](https://vandwellerforum.com/images/collapse.png)