Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interesting to watch but...
#1
Seems more complicated than usable.  Does anyone use a solar tracker? 



I can see maybe building a manually raised and rotated system where you just turn the panels every so often to point towards the sun.  I wonder how much energy is used to monitor and turn the panels with the motor?
  [Image: 414097000.jpg]
Reply
#2
Many years ago I built an sun tracker that held a Fresnel Lens. Used a 1 RPM antenna rotator (remember them) and a photo-electric cell inside a 4" pc of black PVC to trigger rotation based on the No-sun-in-the-tube activation of the motor from 9 AM to 4 PM for East - West. At the end of the day it returned to the 9 AM position ready for tomorrows track. 
Didn't have it N-S motorized, did that manually.

The lens focused on/heated a thick copper disk 40" below the lens. The copper had water channels through it and a constant flow of water was heated, pumped and reheated through recirculation, abt 45 gallons worth in a closed system into a large metal radiator in my garage. My 1976 solar heater system. Worked ok until the pump malfunctioned and .... well... copper melts at about 1977* F.....  Sad
[-] The following 1 user says Thank You to Matlock for this post:
  • frater secessus (02-21-2019)
Reply
#3
Minor detail.
stay tuned 
popeye


 Weirdo Overlord : FMS Fleet Ops , Awards , Badges ,  aka Tamerlane the Impaler Mod.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)